How often have you spent time trying to find the right pieces of glassware to fit together to construct your set-up?
A Flexible Interchangeable Range
Quickfit® back in 1934 pioneered the idea of interchangeable laboratory glassware based on set joint sizes aimed to tackle this issue. Today this range comprises of over 1000 products, most of which feature their signature conical ground glass joints comprising of a tapered cone and socket which allows easy assembly of glassware from simple reflux to a complex fractionation apparatus.
The range currently includes:
Single and multi-neck flasks available in capacities from 5ml to 20,000ml including the following flask types:
- Round Bottom
- Flat Bottom
- Conical Pear
- Shape Florentine
Adapters of all types from simple receiver adapters to more complex splash head adapters and a lot more in between.
- Cold Finger
- and more
Available with removable plastic screw thread tubing connectors to facilitate the safe fitting of hoses.
Funnels range comprising:
- Separating and Dropping Funnels
- Buchner funnels
- Vacuum funnels
- and many more
Glassware Joints that Fit Together with Ease
This glassware is precision manufactured to ensures non-seizing joints. A ground finish provides excellent vacuum performance and assured interchangeability. Made from Pyrex® borosilicate glass it is highly resistant to chemical attack and can be used with most acids, alkalis and organic solvents along with usability over a wide temperature range.
The interchangeable conical joints are made to an accuracy that surpasses the requirements of ISO 383 & DIN 12242 regulations. A two-stage grinding process ensures that the joints have a precision 1:10 taper and super-fine surface finish, resulting in joints that have an exceptionally good seal with a greatly reduced risk of joint seizure. The excellent surface finish also ensures that the joint will not leak and will be gas and vacuum tight.
The Quickfit® sockets feature a rounded rim profile, this round design gives extra strength to the joint and is less prone to chipping than a square rim profile.
One key factor to understand with this range of glassware is the joint sizing.
|This is the most common type of Quickfit® joint and comprises a ground cone and socket. Sizes are described with two numbers e.g. 24/29.
Joint sizes are available from 5/13 to 60/64. Most Quickfit® conical joints are manufactured to comply with European ‘B’ length joint dimensions, as defined in ISO 383.
|Flat Flange Joints|
|This type of joint is utilised on large-capacity reactors and large diameter flasks, and also the construction of conduits for gases, vapours, and low vacuum extraction. The Quickfit® flat flange joints are available with bore sizes of 25 – 100mm.|
|Other Joints including spherical and screw thread joints are also available in the Quickfit® range.|
Quickfit® is a Scilabware brand of glassware. For further information on this or other laboratory glassware ranges available from Camlab please visit our website www.camlab.co.uk, contact us at email@example.com, or fill in the below contact form and we will get back to you.