Liquid Dispensing

How to connect the anti static set for Burkle pumps

The anti-static set for Burkle pumps is essential when decanting flammable liquids. Without a properly earthed system static charge can build up, which can result in fire or even explosion.

Connect the Burkle anti static set correctly following the instructions below

Anti-static Set
The Burkle Anti-static Set for use with their liquid pumps

Setup 1 – decanting into a conductive container

If you are pumping flammable liquids into a conductive container, use the black wire to connect the bulk container to earth (e.g. via a water pipe) and use the red wire to connect the two containers together.

Step 1

Setup 2 – decanting into a non-conductive container

If the receiving container is not conductive, use the black wire to connect the bulk container to earth (e.g. via a water pipe) and use the bare copper wire to connect the bulk container to the decanted liquid.

Step 2

 

For more information on the anti static set and the related Burkle liquid pumps, follow the links above or contact us if you have any questions about safe liquid transfer;

Leave a Reply

Your email address will not be published. Required fields are marked *

Security Code - Please show us you are human * Time limit is exhausted. Please reload CAPTCHA.