Biological contamination can creep into your work stations through dirty work surfaces, non-sterile consumables, polluted reagents or through the users own clothing, coughs and sneezes! Successful culture depends on keeping it free from micro-organisms and maintaining aseptic technique. The Grant Bio UV Cabinets helps to maintains aseptic technique with an innovative dual UV system. The UV-a...
Safely disposing of liquid waste in the lab, especially liquids in PCR multiwell plates, can be an awkward task. The Handvac units from Welch Ilmvac allow you to quickly, easily and safely draw up waste liquid from used PCR plates to collect it in a waste vessel for later disposal. The specialised attachments available make vacuum aspiration from any container quick and simple, while the ...
Grant Instruments have launched a brand new PCR Centrifuge with vortex mixing:
The new CVP-2 is an all-in-one PCR Centrifuge/vortex mixer that allows for simultaneous sample prep of multiple samples all at one time. It's versatility stems from being able to hold semi and fully skirted PCR plates with no additional accessories required.
[caption id="attachment_7295" align="alignnone" width="20...
Techne Product Launch
New Techne in situ hybridisation adapter
For 96-well PCR machine owners wanting to run in situ hybridisation experiments, it is usually necessary to purchase a new thermal cycler or thermal block at significant expense. The Techne in situ hybridisation adapter offers a quick and economical solution. The single-piece machined aluminium in situ hybridisation adapter is i...
[caption id="attachment_4172" align="aligncenter" width="500"] New Combi-Block Thermal Cycler from Techne[/caption]
Techne has introduced a new Combi-Block for its widely used Prime Thermal Cycler range, providing instrument users with even more flexibility
The new Techne Prime Combi-Block has a total capacity of 66 tubes, either 33 x 0.2 ml or 33 x 0.5 ml volume. There is an optional 25°...
Testing for Horse DNA in Meat based Processed Food-
Background
European Union ministers have called in Europe's law enforcement agency to help
tackle the spreading crisis over mislabelled frozen meals containing horsemeat, and
promised rapid DNA food testing in an effort to restore consumer confidence. The
European Health Commissioner Tonio Borg said the EU was calling on all 27 member
...
Reagent reservoirs are an essential accessory for a multitude of liquid handling procedures. The Reservoir 8000 is a unique design which enables the user, when pipetting, to provide a new level of accuracy and cost efficiency that will benefit the following applications and more: ELISA assays Cell culture media addition PCR reagent handling, sequencing reactions Kinetic ass...
Techne PrimeQ Real time PCR Reaction Volume
[caption id="attachment_2983" align="aligncenter" width="273"] Techne PrimeQ Real time PCR[/caption]
When using Techne PrimeQ we recommend a sample volume of 20µl, which in itself is economical in the use of costly reagents. The application note A08-001A, which can be found online demonstrates how this can be reduced by half to 10µl with no loss...
Troubleshooting Micro Volume Nucleic Acid Measurements on the Genova Plus/Nano
[caption id="attachment_3306" align="aligncenter" width="217"] Jenway genova nano[/caption]
•A260 nm Absorbance maximum of nucleic acids
The optimal absorbance range for the accurate measurement of nucleic acids is between 0.050 and 1.000 Abs. When using a 1cm path length cuvette in the Genova Plus this abso...
PrimeQ Real time PCR Filter SelectionÂ
[caption id="attachment_2983" align="aligncenter" width="273"] Techne PrimeQ Real time PCR[/caption]
Filter selection
When performing experiments requiring detection of more than one fluorophore, it is highly desirable for minimal overlap in signal from each dye. Whilst the choice of fluorophore used is important, the design of the optics for samp...
[caption id="attachment_3244" align="aligncenter" width="300"] Techne Prime Thermal Cyclers[/caption]
Techne's new Prime thermal cyclers feature a brilliant touch interface
The well-established Techne thermal cycler range has been redesigned to provide easier programming and increased instrument flexibility. All Prime models have an enhanced thermal engine, an outstanding colour touch inter...
[caption id="attachment_2983" align="aligncenter" width="461" caption="Techne PrimeQ Real time PCR"][/caption]
Techne are proud to announce the launch of the PrimeQ real-time PCR system. The Techne PrimeQ Real time PCR instrument has been designed with an open architecture and chemistry format that allows user flexibility in qPCR methods and research pursuits. The accompanying Quansoft® soft...
Thanks for sharing such a great information.. It really helpful to me.. I always search to read the quality content and finally i found this in you post. keep it up!
I came across your article about "DPD Tablets" on Camlab Info, and it's a valuable resource for anyone seeking information about water testing and analysis using DPD tablets. Your explanation of their usage and significance in water quality monitoring is quite informative.
This article on nanocolor tube tests is a gem for analytical enthusiasts. The idea of zero calibration is intriguing, and your detailed explanation makes it accessible. The step-by-step process helps demystify the technique for beginners like me. The use cases you've highlighted, particularly in...
Grant have introduced the new Controlled Rate Freeze Thaw (CRFT), which is a liquid nitrogen and cryogen free controlled rate freeze and thaw system for cryopreservation in a wide range of applications. Cryopreservation is a process where biological materials such as cells, tissues...
A dipslide is a means of testing the microbial content of liquids. This is a common method of monitoring and measuring microbial activity within many systems and commonly cooling systems. Usually the use of a dipslide is the first line of defence for the testing of microbial issues that could be...
Purchasing items using donated funds without the burden of VAT will now save many Millions of pounds each year which can be put to better use in advancing scientific knowledge to provide new treatments and cures that will shape the medicines of the future.
Working with pressure/vacuum conditions in the lab is common but not all products are designed to withstand this. Products with appropriate geometry and wall thickness are suitable for working safely with pressure. For example, filtering flasks, desiccators, or flat flange vessels, as well as...
