Dipping vessels for liquid sampling

Dipping containers and vessels are used in various areas to collect liquids for sampling. Bürkle produces the most comprehensive collection of dipping containers by a long way, the right product for every use as it were. Bürkle offers dipping bottles and immersion cylinders for sediments, for the area of environmental issues, for chemically aggressive products, for petrochemistry, for the ex protection area. The dipping bottles for the Ex protection area are made of nickel-plated brass, therefore they do not oxidise. Dipping Bottles [caption id="attachment_4416" align="aligncenter" width="225"] Dipping Bottle[/caption] This dipping bottle is ideal for sewerage plants, for mud and water samples. For testing crude oil, liquid mineral oil products, fuels, fuel oils and petroleum. Made completely from a non-sparking material the dipping frame is constructed from nickel plated brass. The easy click closure is made of electrically conductive polyamide. Dipping Vessels [caption id="attachment_4417" align="aligncenter" width="226"] Dipping Vessel[/caption]   [caption id="attachment_4418" align="aligncenter" width="216"] Dipping Vessel in Use[/caption] Dipping vessels are heavy. Lowering requires the use of special manually-operated drum reels with a large winding diameter. Other manually-operated drum reels place too much strain on the user's wrist and could represent a health hazard. Lowering cables and chains made from different materials, as well as manually-operated drum reels, also for Ex-proof applications, available as accessories. Dipping vessels are for taking all-layer samples from tanks, tank wagons, water courses, water purification plants. Dipping vessels are for taking a continuous flow sample. When the dipping vessel is lowered, liquid will run constantly through it. When the vessel is pulled back out of the liquid both valves close automatically. Target Immersion Cylinders [caption id="attachment_4419" align="aligncenter" width="226"] Target Immersion Cylinder[/caption] Precise liquid samples can be taken with the target immersion cylinder. Lower the immersion cylinder to the required depth on the high tensile hose. When the target has been reached, open the air valave at the tube end, this vents the immersion cylinder and fills it up. Retrieve the immersion cylinder. Open the cover and pour out the sample.  These items are  available on our website.