Skip to content
  • Home
  • About Camlab
  • Camlab Service Department
  • Camlab Websites
  • Newsletter

The Laboratory People

Camlab's blog and information database

Category: PPE

gloves

Which nitrile glove do I need? A guide to Shield gloves

August 18, 2020 Sarah Brudenell Leave a comment

The range of Shield gloves is available in three different colours – adopting a traffic light system for straightforward selection…

Read More
Valved vs unvalved

Whats the difference between valved and unvalved respirator masks?

July 20, 2020August 17, 2020 Sarah Brudenell Leave a comment

Disposable respirator masks offer protection to the wearer against respiratory hazards such as dusts and mists. The filtering face piece…

Read More
Maintenance of the 3M Versaflo

Care and maintenance of the 3M Versaflo powered respirator series T-300

July 17, 2020November 3, 2022 Karen Lemon Leave a comment

The 3M Versaflo TR-300 series of powered air respirators have to be maintained to retain their full protection levels. It…

Read More
FFP masks

What is the difference between an FFP1, FFP2 and FFP3 disposable mask?

July 16, 2020August 17, 2020 Sarah Brudenell 1 Comment

A filtering face piece (FFP) respirator mask is a type of respiratory protective equipment (RPE). RPE is designed to protect…

Read More

Safe disposal of PPE and potentially contaminated waste from Covid-19 exposure

June 29, 2020November 3, 2022 Karen Lemon 1 Comment

There are guidelines regarding the safe disposal of PPE like gloves, cleaning cloths, masks and wipes. The best resource for…

Read More
7500 Face Mask

What filters do I need for the 3M 7500 series half face mask?

June 15, 2020November 3, 2022 Sarah Brudenell Leave a comment

The 7500 series half face mask is a reusable respirator mask that when combined with appropriate filters can provide respiratory…

Read More
Fit Test Cover

Do I need a fit test to wear a respirator mask?

May 6, 2020September 11, 2020 Sarah Brudenell

If your company uses tight-fitting respiratory protective equipment (RPE) then a fit test is a legal requirement. The fit test…

Read More

How to choose the correct lens type for your protective glasses

December 18, 2018 Luke Scicluna

Understanding the tints used on a lens is one of the most critical factors in deciding which is the most…

Read More

Categories

Us on Twitter

  • Did you know..... Black holes are invisible since their gravity is strong enough to prevent light from escaping.… https://t.co/QgeT2Gvxui (9 hours ago)
  • Borosilicate glass vs Soda Lime glass vs Pyrex – what is the difference? https://t.co/08CynNF89b (10 hours ago)
  • Moisture #balances measure the water weight in a sample. It takes out the moisture from a sample. so you can work o… https://t.co/hR8CMo9Xe4 (Feb 2, 2023)

Subscribe

Enter you email below to receive blog updates:
© 2023 The Laboratory People