Biochemical Oxygen Demand Archives - The Laboratory People

New OxiTop Heads

Whilst most commonly associated with the monitoring of biochemical oxygen demand (BOD), the OxiTop system can be used for many…

A chemical oxygen demand (COD) test is used to measure the amount of organic compounds in a water sample. It…

The new BD600 BOD measurement system from Lovibond replaced their Oxidirect system in 2015 and has proved to be a…

As well as offering a safer, faster method of COD analysis, the PeCOD system of COD analysis may also offer…

The Oxidirect BOD measurement system has been replaced by Lovibond’s new BD600 system, which has a range of additional features

Ask the expert: What are the differences between Chemical Oxygen Demand (COD) and Biological Oxygen Demand (BOD)? Answer: Both COD and BOD test…

Municipal Wastewater Treatment Plant Moving to 24/7 COD Monitoring The University of Guelph, based in Ontario Canada conducted a detailed…

Application study: The use of photoelectrochemical chemical oxygen demand to study drinking water Abstract: “This study investigated the use of a…

Ask The Expert: What is the challenge with the dichromate COD approach and why is an alternative method required? Answer: The traditional COD…

The TC series of thermostatically controlled cabinets or cooled incubators, from Tintometer is used for continuous temperature control over a…

Chemical Oxygen Demand (COD) and Biochemical Oxygen Demand (BOD) are important diagnostic parameters for the determination of water quality in…

A little bit of light reading about Jospeh Williams Lovibond.. Joseph Williams Lovibond (1833–1918) was a British brewer who developed…