QUANTOFIX® test strips are semi-quantitative in nature. They meet the most important requirements of rapid test strips and are used widely in water testing as an economical way of testing for common water quality parameters like chlorine, ammonium, water hardness and phosphate.
Most of the QUANTOFIX® test strips can be carried out in 10-120 seconds. That makes the application very quick.
All QUANTOFIX® tests are ready to use kits. They are precalibrated and contain all necessary equipment and reagents. As “labs in a pocket” they are very handy to use.
The color charts are adjusted and checked using certified standard solutions that are directly traceable to. The user can be sure to receive accurate readings whenever they test.
Methods vary so always follow the instructions that come with the test strips. The method has graphical illustrations to follow and written instructions.
- Rinse the measuring vessel with the test solution and fill to 5ml mark
- Add 1 spoon of buffer solution to the sample
- Add 5 drops of Cl2-2
- Shake carefully
- Immediately dip the test strip in the sample
- Wait 45 seconds
- Shake off excess liquid
- Compare within 10 seconds with the colour scale
Take note of any interference’s for your particular test method as this can affect the colour intensity or remove it completely.
If you use large quantities of test strips or are considering using them we have offers on Quantofix test strips until June 2018. Purchase £150 worth of any Quantofix strips and get 25% off your order, (offer only applies to Macherey Nagel Quantofix strips bought in any combination to the value of £150).
If you need a safety data sheet it can be found here, you just need the catalogue number of the product which can be found on the box, i.e. 91317 is Quantofix Chloride test strips
Just contact us to take advantage of this offer and get this special discount code to use online or through our customer service team.